Wallpaper Calculator

Enter your wall widths, wall height, roll size and pattern repeat. Get the drop length, drops per roll, drops needed and how many rolls of wallpaper to buy.

Free · No sign-up · Runs in your browser

How to use the wallpaper calculator

Wallpaper is hung in vertical strips called drops, and the pattern has to line up from one drop to the next. That is why dividing wall area by roll area nearly always underestimates the order. This calculator follows the method decorators use: it works out how long each drop really is once the pattern repeat and trimming are allowed for, how many whole drops you get from a roll, and how many drops each wall needs.

  1. Choose metric or US units. Walls and roll length are in metres or feet; roll width, repeat and trim are in centimetres or inches.
  2. List the wall widths separated by commas, for example 4.2, 3.6, 4.2, 3.6 for a whole room or a single number for a feature wall.
  3. Enter the wall height from floor or skirting to ceiling, and the total width of any wide openings you won't paper.
  4. Pick a roll size or enter your own, then enter the pattern repeat and match type from the label.
  5. Read the drop length, drops per roll and rolls to buy, and order the figure with a spare roll from a single batch.

Wallpaper formulas

Drop length = ⌈(height + trim) ÷ repeat⌉ × repeat (+ ½ repeat for half-drop)
Drops per roll = ⌊roll length ÷ drop length⌋
Drops needed = Σ ⌈wall width ÷ roll width⌉ − ⌊openings ÷ roll width⌋
Rolls = ⌈drops needed ÷ drops per roll⌉

Rounding per wall matters: a 3.6 m wall with 0.53 m paper needs 6.8 drops, which means 7, and you can't use the leftover strip on the next wall without breaking the pattern at the corner. The area method is shown alongside for comparison, so you can see how much the pattern and the offcuts add.

RollWidthLengthArea
European standard0.53 m10.05 m5.33 m²
European wide0.70 m10.05 m7.04 m²
Extra wide (vinyl, mural)1.06 m10.05 m10.65 m²
US double roll20.5 in33 ft56.4 ft²
US double roll, wide27 in27 ft60.8 ft²

These are common sizes rather than a standard every maker follows, so always check the roll label.

Worked examples

A bedroom in standard European rolls

Walls of 4.2, 3.6, 4.2 and 3.6 m, 2.5 m high, with 0.53 × 10.05 m paper and a 53 cm straight-match repeat. Height plus 10 cm trim is 2.6 m, which rounds up to five repeats, so each drop is 2.65 m and a roll gives three drops. The 4.2 m walls need 8 drops each and the 3.6 m walls 7 each, so 30 drops, or 10 rolls. Buy 11 with a spare. The area method would have said 39 m² ÷ 5.33 = 8 rolls, two short.

A feature wall with a large half-drop pattern

One 3.8 m wall, 2.7 m high, with 0.53 m paper and a 64 cm half-drop repeat. Height plus trim is 2.8 m, which rounds up to 3.2 m, plus 0.32 m for the half-drop, so each drop is 3.52 m and a roll yields only two. The wall needs 8 drops, so 4 rolls, or 5 with a spare.

A US dining room

Walls of 12, 14, 12 and 14 ft, 8 ft high, with 20.5 in × 33 ft double rolls and a 21 in repeat. Height plus a 4 in trim is 100 in, which rounds up to 105 in, so each roll gives three 8.75 ft drops. The walls need 8 + 9 + 8 + 9 = 34 drops, so 12 double rolls before the spare. Skipping a 6 ft wide opening saves 3 drops and one roll.

Who this calculator helps

  • Interior designers and architects specifying wallcoverings and checking quantities on a finishes schedule.
  • Decorators and painters quoting a job and ordering stock from one batch.
  • Retailers and showrooms giving customers an accurate roll count at the counter.
  • Homeowners pricing a feature wall or a whole room before ordering samples.
  • Hospitality and workplace fit-out teams costing large runs of commercial wallcovering.

Practical tips

  • Check every roll has the same batch number before you start, and keep the labels for reordering.
  • Start hanging from the least visible corner, because the last drop rarely matches the first.
  • For walls you plan to paint instead, use the paint calculator, and plan the scheme with the room colour palette generator.
  • Pair wallcovering choices with the floor and joinery finishes in the material palette builder.
  • Lining paper under a heavy wallpaper uses the same drop method without a repeat, so run the calculator again with free match.

Want to see a pattern or colour on the actual walls before ordering? Try it on a photo of the room with Wall Paint, or restyle the whole space with Room Redesign.

From numbers to pictures

See the space before it's built.

Once the plan works on paper, BasedFrame turns a sketch, a massing model or a site photo into a photoreal render in seconds. Try Sketch to Render or Room Redesign with free credits.

Try BasedFrame free

FAQ

Wallpaper Calculator FAQ

How do I calculate how many rolls of wallpaper I need?

Work in drops (strips). Add a trimming allowance to the wall height and round up to a whole pattern repeat to get the drop length. Divide the roll length by the drop length and round down to get drops per roll. Divide each wall width by the roll width and round up to get drops per wall, add them up and divide by drops per roll, rounding up.

How much wallpaper is in a standard roll?

A standard European roll is 0.53 m wide and 10.05 m long, about 5.3 m². Wide rolls of 0.70 m and 1.06 m are also common. In the US, wallpaper is usually priced by the single roll but sold in double rolls, often around 20.5 in × 33 ft (about 56 ft²) or 27 in × 27 ft. Check the label for the exact size.

How does pattern repeat affect the number of rolls?

Each drop has to start at the same point in the pattern, so its length is rounded up to a whole number of repeats. A 64 cm repeat on a 2.5 m wall turns a 2.6 m cut into a 3.2 m drop, so 0.6 m of every drop ends up as offcut. On some wall heights that costs a whole drop per roll, and large repeats can add 20–30% to an order.

What is the difference between straight match and half-drop match?

With a straight match the pattern lines up horizontally across every drop. With a half-drop match every second drop is shifted down by half a repeat, which wastes more paper. The calculator adds half a repeat to each drop for a half-drop pattern, which is a common estimating allowance.

Should I subtract doors and windows?

Only for wide openings. Drops above and below windows and over doors still use most of a strip, so many decorators ignore openings narrower than about a metre or a yard. The calculator lets you enter the total width of openings to skip and only removes whole drops.

How much extra wallpaper should I buy?

Buy at least one spare roll from the same batch or lot number. Rolls from different print runs can vary slightly in colour, and a spare covers mistakes, damage and future repairs. The calculator shows the order with one spare roll added.

How much trimming allowance should I add?

About 10 cm (4 in) per drop is typical, so 5 cm at the ceiling and 5 cm at the skirting or baseboard. Uneven ceilings or old walls may need more. You can change the allowance in the calculator.

Does this work for a feature wall?

Yes. Enter just the width of that wall. For a ceiling, enter the ceiling width in place of the wall widths and the ceiling length in place of the height, since you hang the drops across the shorter span.

Keep exploring

More free tools for architects

Turn any listing
into rooms that sell

Start with a Zillow link or a single photo. Redesign, stage, relight and walk buyers through every room, ready to list today.